Binder VAP 1 - 10 Technical Description; Technical Data

VAP 1 / VAP 2 06/2020 Page 38/52
10. Technical description
10.1 Technical data
The technical data given here are based on test results of measured values and are
average values that are intended to facilitate the selection of the products. It is the
responsibility of the user to determine the suitability of the product for a specific purpose
and they assume the risk and any liability for it.
Device type
VAP 1
VAP 2
Dimensions
Height
mm / inch
500 / 19.7
500 / 19.7
Width
mm / inch
310 / 12.2
310 / 12.2
Depth
mm / inch
350 / 13.8
350 / 13.8
Weight
kg / lbs.
18.9 / 41.7
25.6 / 56.4
Performance data
Pumping speed acc. to ISO 21360-1 at 50 Hz
m
3
/ h
2.0
4.0
Pumping speed acc. to ISO 21360-1 at 60 Hz
m
3
/ h
2.2
4.4
Ultimate pressure (base pressure) acc. to ISO 21360-1
mbar
≤ 5
≤ 2
Max. inlet/outlet pressure
mbar
1050
1050
IP protection degree acc. to EN 60529
IP
40
40
Motor insulation class
°C
F - 160
F - 160
Motor protective winding contact
self-retaining
Noise level
dB (A)
≤ 44
≤ 44
Operating temperature range
°C
+ 15 to + 40
+ 15 to + 40
Max. medium temperature
°C
+ 40
+ 40
Ambient temperature range for storage
°C
+ 10 to + 40
+ 10 to + 40
Max. ambient humidity for storage
% r.F.
90
90
Electrical data of 230 V device
Rated voltage at 50 Hz
V AC
230
230
Rated voltage at 60 Hz
V AC
230
230
Nominal current at 50 Hz
A
1.60
3.12
Nominal current at 60 Hz
A
1.50
3.10
Electrical data of 120 V device
Rated voltage at 50 Hz
V AC
115
115
Rated voltage at 60 Hz
V AC
115
115
Nominal current at 50 Hz
A
3.35
5.60
Nominal current at 60 Hz
A
3.20
6.20
All technical data is specified for devices with standard equipment at an ambient temperature of 22 +/-
3 °C / 71.6 +/- 5.4 °F and a power supply voltage fluctuation of +/-10%. Technical data is determined in
accordance to the relevant standards.
All indications are average values, typical for devices produced in series. We reserve the right to
change technical specifications at any time.