Instruction Manual
Page 4 of 40 Issue: 2.1
N:\Engineering\Manuals\Pump Unit E2-30 & 40 R2.1.doc
General Description – Section 1.1
The E2-30 pump uses a
standard EExd 4 pole AC
electric motor to drive the fluid
section, for pumping paints,
solvents and other suitable
materials.
The unit combines
conventional electrical
hardware to achieve optimum
operating performance at a
lower cost.
Running costs are much lower
than compressed air driven
models.
The Model E2-30 Electric
Pump achieves a reciprocating
drive by using a cam and cam
followers combined with a
sliding carriage unit.
Equal thrust on each stroke
together with the special cam
profile reduces fluid pressure
fluctuations to an absolute
minimum.
The operating speed is
adjusted by an AC frequency
inverter between 20 and 80 HZ
and can be adjusted infinitely
within this working range.
Complies with current relevant
European and US Legislation
Patents Granted
To Next Page
Loading...
