Binks E2-40 - Pump Specifications

Instruction Manual
Page 7 of 40 Issue: 2.1
N:\Engineering\Manuals\Pump Unit E2-30 & 40 R2.1.doc
Specification – Section 1.3
Specification
Pump Nominal Stroke 50 mm (1.97 ins)
E2-30 Maximum Fluid Pressure
E2-40 Maximum Fluid Pressure
18 bar (261 psi)
14 bar (203 psi)
E2-30 Nominal Flow Volume / Cycle
E2-40 Nominal Flow Volume / Cycle
0.75 Litres (0.20 US Gall)
1.00 Litre (0.26 US Gall)
E2-30 Fluid Output @ 20 HZ (10 cycles/min)
E2-40 Fluid Output @ 20 HZ (10 cycles/min
7.5 Litres / min (2.0 US Gall / min)
10 Litres / min (2.64 US Gall / min)
E2-30 Fluid Output @ 80 HZ (40 cycles/min)
E2-40 Fluid Output @ 80 HZ (40 cycles/min)
30.0 Litres / min (8.0 US Gall / min)
40.0 Litres / min (10.6 US Gall / min)
Fluid Inlet / Outlet Connections 1 1/2” Sanitary
Gearbox Ratio 56:1
Gearbox Oil Quantity (EP ISO VG 220 Mineral Oil)
(EU Model)
3.70 Litres (0.90 US Gall)
Gearbox Oil Quantity (SHC 630 Synthetic Oil)
(USA Model)
3.70 Litres (0.90 US Gall)
AC Induction Electric Motor -EU Model
1.5 kW 4Pole 1400 RPM 90L
(1.5 kW 4Pole 1400 RPM 90L Japan Model)
400V 3PH 1.5 kW @ 50HZ
EEx d 11B T3
Rated 20 to 80 Hz (with thermisters)
AC Induction Electric Motor - USA Model
460V 3PH 2 Hp @ 60HZ
Class 1, Group D.
Rated 20 to 80 Hz (c/w thermostats)
Total Weight of Pump (inc electric motor) 250 Kg (550 Lb)