Bintelli B1 - Installing the Front Wheel

16
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Installing the Front Wheel:
1. Place wheel into fork (Figure 1).
2. Insert Quick Release Axle (Figure 2) as shown in Figure 3 & 4 with a nut.
3. When axle is in place, push the lever down on the axle to lock it into place (Figure 5).
4. Spin the wheel to make sure it is centered and clears the brake shoes.
5. Tighten the brakes if necessary.
**Important: It is very important to check the front wheel connection to the bicycle. Failure to properly tighten may cause the front wheel to come off.