26
How To Adjust the Derailleur
1.) The cable must be adjusted for the 6th and 7th gear to work
2.) With it on the center stand, run the gears down to 1st gear
3.) On the derailleur, there is a clamp that holds the cable, loosen this nut
4.) On the gear shifter on the handlebar, push the other end of the cable in to the socket so that there isn’t any slack at that end
5.) Go back to the derailleur and use a pair of pliers to pull the cable snug and tighten the clamp nut
** The key to this adjustment is to not have any slack in the cable at the gear shifter end on the handlebar
To Next Page
Loading...