S3 Cell Sorter Instruction Manual | 77
7.9 User Reports
User reports are accessible by
administrators and can be used to track
system usage over time (Figure 86). These
reports can be printed for reference and
will include the session notes entered when
users were logged into the software.
Fig. 86. User report.
The second QC report is a trending report in which a range of dates can bev viewed for PMT
voltages, CVs, and drop drive amplitude and frequency (Figure 85). When viewed, comments
can be added and the reports may be printed for reference.
Fig. 85. QC trending report.
To Next Page
Loading...
