Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 11
Easy operation
Through the menu structure of the on-board software. The display (2x16
characters) and the keyboard with 5 keys provides clear access to all
features of the flexible software. If desired the washer may also be
operated from a PC using the optional Windows based software.
8 and 12-way manifold
as standard configuration. Additional manifolds available as option. The
manifold is easily exchanged. Depending on the type of strip-plate (8- or
12-way strips) the corresponding manifold is used to wash a selected
number of strips or the complete plate.
Up to 3 different wash liquids
The basic version incorporates 1 liquid line for wash buffer, rinse liquid
and waste. The extended version accesses to up to 3 different wash buffers
connected to the instrument which can be selected by software.
Vacuum and pressure free system
Any appropriate container can be used to hold the wash buffer. No special
bottles are required.
Quiet operation
The Fluido 2 is very quiet due to the special pumps used. Additionally the
pumps are only operating when the washing procedure is performed.
Automatic periodic rinse
may be activated in order to avoid clogging if the washer is not operated.
Aerosol Protection
Covers the manifold and the rear plate position. It can easily be removed
for cleaning and maintenance.
Easy access to all tubes and valves
All valves and tubes which may require handling by the user are easily
accessible to assure fast and convenient maintenance.
Plate setup
Is used to optimize the movement of the plate and manifold according to
the specific dimensions of different plate types.
Residual volume is minimized by the crosswise aspirate function which
aspirates in the edges of the well. Up to 20 different plate types (flat- and
round-bottom) can be configured and stored on the instrument.
Bottom Detection
As part of the plate setup this unique feature supports optimization of plate
specific parameters. The instrument is able to automatically detect the