biochrom Anthos Fluido 2 - Define Procedure Menu

Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 42
Screen
28.
Start Prime / Rinse
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu.
<enter>
Press <enter> to start the prime / rinse cycle with the above set
parameters.
Screen
29.
Status Message
 Function keys:
<F1> or <F2>
Select "Stop" to cancel the current prime / rinse cycle and return to the
main menu.
9.3 Define Procedure Menu
Screen
30.
Define Procedure Menu
In this menu a procedure can be defined. Every procedure contains one or
more cycles and a plate. The cycles and the plate must be defined prior to
the procedure.
 Function keys:
<F1> or <F2>
Select another menu.
<+> or <->
Select "<new>" to define a new procedure or select an existing
procedure to edit it.
Start Pri/Rinse
esc
Periodic rinse
Stop
Def Procedure:
<< >> <new>