biochrom Anthos Fluido 2 - Delay of Final Aspiration; Define Cycle Menu

Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 47
<enter>
Confirm the selection and go to the next screen.
Screen
41.
Delay of Final Aspiration
Select "Yes" to delay the final aspiration of the plate. This is used in strip
mode: The final aspiration is performed only after the last cycle in the last
filled strip is done and the soak time has expired.
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu without saving any changes or
"<<" to return to the previous screen.
<+> or <->
Use these keys to toggle between "Yes" and "No". If "Yes" is selected
the final aspiration is performed after the last cycle for all strips is
finished.
<enter>
Confirm the selection. The set parameters will be stored and the
program returns to the main menu.
9.4 Define Cycle Menu
Screen
42.
Define Cycle Menu
This menu allows to define all parameters of a cycle. A cycle is required
to define a complete wash-procedure.
 Function keys:
<F1> or <F2>
Select another menu.
<+> or <->
Select "<new>" to define a new cycle or select an existing cycle to edit
it.
<enter>
Confirm the selection of the cycle and go to the next screen.
Delay final asp:
<< Esc Yes
Def Cycle:
<< >> <new>