biochrom Anthos Fluido 2 - Programming; Run Procedure; Wash liquid Check

Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 35
9 Programming
9.1 Run Procedure
Screen
13.
Run Procedure
In this menu you can select the procedure to be started. All procedures
defined in the "Define Procedure Menu" can be selected.
 Function keys:
<F1> or <F2>
Select another menu.
<+> or <->
Select a procedure to be started.
<enter>
Confirm the selection of the procedure and go to the next screen.
Screen
14.
Wash liquid Check
A warning to check the liquid level of the wash bottle is displayed (this
function needs to be activated in the "Setup Menu").
 Function keys:
<F1> or <F2>
Select "Yes" or "No". If "No" is selected the instrument will return to
the main menu.
Run Procedure:
<< >> Proc1
Washliquid OK?
No Yes
Waste empty?
No Yes