Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 16
The power indicator is located on the front left side of the unit and is
marked with the following symbol.
The stand-by indicator may show 3 different states:
Green light: Instrument is in stand-by (ready for operation).
Not illuminated: Instrument is not ready for operation.
Please Note:
The power indicator does not indicate that the instrument is turned on or off or that it
is connected with mains but only that the instrument is ready for operation!
In order to make sure the instrument is disconnected from power the main
switch on the rear side of the unit has to be switched to the "OFF-position"
indicated with a "0" symbol. Alternatively the power cord can be
disconnected from the unit.
To Next Page
Loading...
