biochrom Anthos Fluido 2 - Cycle1 Selection; Cycle2-8 Selection

Biochrom Anthos Fluido-2 Microplate Washer v2.0 Page 44
<enter>
Confirm the wash liquid and go to the next screen.
Screen
34.
Cycle1 Selection
Select the first cycle to be used for this procedure. The cycles must be
defined in the "Define Cycle Menu" prior to the definition of the
procedure.
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu without saving any changes or
"<<" to return to the previous screen.
<+> or <->
Use these keys to scroll through the available cycles.
<enter>
Confirm the selection of the first cycle and go to the next screen.
Screen
35.
Cycle2-8 Selection
Select the cycles 2 to 8 to be used for this procedure. The cycles must be
defined in the "Define Cycle Menu" prior to the definition of the
procedure. By selecting “---“ the previous cycle will be the last cycle in
the procedure.
 Function keys:
<F1> or <F2>
Select "Esc" to return to the main menu without saving any changes or
"<<" to return to the previous screen.
<+> or <->
Use these keys to scroll through the available cycles.
<enter>
Confirm the selection of the cycle and go to the next screen.
Cycle1:
<< Esc C1
Cycle2:
<< Esc ---
Final asp time:
<< Esc 0 sec