TGRADIENT Manual __________________________________________________________ 18
copy to: ½-3. subdirect.:
½-4. subdirect.:
Main direct.--- ½-5. Subdirect.:
½-6. subdirect.:
½-7. subdirect.:
A ? B C quit D enter
Confirm your selection with [D enter].
copy from directory 3 program 0
to directory 6 program
A list B C quit D enter
Choose an empty memory from the list with [A list].
copy from directory 3 program 0
to directory 6 program 6
enter = OK
target program contains 0 steps
A list B C quit D enter
Note: Before you confirm with [D enter] the target memory is checked. If there is no program in
the target, memory the message “ target program contains 0 steps” is displayed. If the memory
already contains a program the number of steps is displayed.
Note: If you copy a program to a memory that already contains a program, the former program
will be deleted!
Save a copy of the program in the new directory with [
D enter].
5.3 Delete program
Select program as described in section 4.1 and 4.2
Directory: 3
program no. 0 Name: TEST 1
lid temp: °C preheating: on
edit
A copy B delete pgm C quit D enter
To delete this program press [B delete pgm].
To Next Page