Biostar M6VLA - Set User Password; Save and Exit Setup; Exit Without Saving

Chapter 2 BIOS Setup
2-5
Set User Password
You can specify both a User and Supervisor password. When you select either
password option, you are prompted for a 1-8 character password. Enter the
password and then retype the password when prompted.
Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
Enter Password:
SAVE to CMOS and EXIT (Y/N)? Y
Quit without Saving (Y/N)? N