BT-740 Operation manual
P/N : 740-ENG-OPM-EUR-D03
1 System basics
1.1 Intended use
The BT-740 Patient Monitors acquire the physiological signals such as ECG, respiratory rate,
non-invasive blood pressure (NIBP), Invasive Blood Pressure (IBP), blood oxygen saturation
(SpO
2
), temperature. The signals are converted into digital data and processed, examines the
data for alarm conditions and display the data. The monitor also provides operating control for
the user. The patient monitor intend to use in hospital clinical area such as intensive care units,
cardiac care units, operating room, emergency department, to provide additional information
to the medical and nursing staff about the physiological condition of the adult. The BT-740
patient monitors are intended to be used only under regular supervision of clinical personnel.
It is suitable for adult and pediatric. The intended locations of use are hospitals and clinics.
1) Intended patient population
- Pediatrics (30 days < and <18 years) and adult (>18 years adults)
2) Intended user profile
- Doctor, physicians or nursing staff who is qualified personnel
- Basic experiences or knowledge on medical field, especially on patient monitoring
- Trained or requested to read IFU before use
3) Environment of use
- Hospital and clinic
- Requirements: Stable power source
4) Scope of application
This monitor is suitable for bedside monitoring of adults and pediatric. This monitor enables
ECG, respiration (RESP), pulse rate (PR), blood oxygen saturation (SpO
2
), noninvasive blood
pressure (NIBP), temperature (TEMP), invasive blood pressure (IBP), CO
2
and C.O. monitoring. It
is equipped with a replaceable built-in battery to provide convenience for the patient
movement in hospital.
To Next Page
Loading...
Need help?
General
