Bistos BT-740 User Manual

BT-740 Operation manual
78
P/N : 740-ENG-OPM-EUR-D03
Bistos Co., Ltd.
2018.05
10.5 Setting SpO
2
Select SpO
2
parameter area or SpO
2
wave area → “SpO
2
Setup” menu, which is shown below.
You can set SpO
2
through “SpO
2
Setup” menu.
Figure 10-3: “SpO2 Setup” menu
10.5.1 Setting wave speed
 Select “Wave Speed” and set wave speed to “12.5mm/s” or “25mm/s”; the faster speed,
the smoother wave.
10.5.2 Setting wave mode
 Select “Wave Mode”, and set the wave drawing mode
 “Scan”: Scan mode.
 “Fill”: Fill mode.
10.5.3 Setting average time
 Select “Average Time”, and set the average time to “2-4s”, ”4-8s” , ”8-16s”
10.5.4 Pulse volume
 The user can set the pulse volume. The pulse volume can be set to 0, 1, 2, 3, 4, 5, 6, 7, 8,
or 9. By default, the pulse volume is set to 3.

Bistos BT-740 Specifications

General

Brand	Bistos
Model	BT-740
Category	Monitor
Language	English