BT-740 Operation manual
P/N : 740-ENG-OPM-EUR-D03
8.5.4 Setting calculated channel
In “RESP Setup” menu, select “Calculated Channel”, and set the calculated channel. The
calculated channels are “RA-LA”, “RA-LL”, “LA-RL” and “LL-RL”. The default is “RA-LA”.
8.5.5 Setting sensitivity
In “RESP Setup” menu, select “sensitivity”, and set the sensitivity. The sensitivity is “1” / “2” /
“3” / “4” / “5”. The default is “2”.
8.5.6 Show
The user can set the show. When the CO
2
module is open, the show can be set to RESP or CO
2
.
8.6 Alarm setup
Select “Alarm Setup >>”→ “Alarm Setup” interface to set respiration related alarms; see 6.5
Alarm Setup for the setting method.
To Next Page
Loading...
Need help?
General
