SRP-S300
Ver. 2.00
7-2 Cleaning Printer
• The presence of dust, foreign matter, adhesive matter, or other pollutants inside the
printer’s head and internal capacity may undermine printing quality.
It is recommended to clean printer at every paper roll change.
Periodic cleaning (every 3 months at minimum) is recommended to maintain print
quality. It is recommended to clean after every 30 rolls when using Sticky,
Re-stick, Linerless Extreme paper.
1) Open the Printer Cover and remove the paper currently in use.
2) Residue or contamination of TPH should be wiped out by alcohol for medical.
3) Clean the paper sensor and paper roller with a cotton swab or a dry cloth.
4) Insert a paper roll and close the Printer Cover.
- Be sure to clean after turning the printer off.
- Be careful not to leave scratches in the print head
The printer may be damaged.
- Print head is very hot while the printer is printing, so clean the
printer after cooling it sufficiently with power off.
- Do not touch heated area of print–head when cleaning.
Personal injury may result from static electricity, etc.
To Next Page
Loading...
Need help?
General
