BK Precision 8614 - Restore Factory Default Settings

28
Restore Factory Default Settings
All instrument settings can be reset back to their factory default values by doing the following:
Note:
Restoring the instrument to factory default will change all current instrument
settings and parameters back to their default values.
1. From the SYSTEM menu, select Initialize and press .
2. The following screen will display. Select Yes to restore default settings, or No to cancel.
The following table lists some of the factory default settings.
Table 3 - Factory Default Settings
Communication
RS232 (4800, 8, N, 1, NONE)
Display On Timer
Off
Trigger Source
Manual
Protocol
SCPI
Von
Latch
A-Limit
Off
INITIALIZE SYSTEM?
NO YES
SYSTEM MENU
Initialize Power -ON Buzzer