1
1 General Information
1.1 Product Overview
The 9200 Series power supplies are multi-range single-output DC power supplies capable of
replacing several supplies on the bench. Unlike conventional supplies with fixed output ratings,
these multi-range power supplies automatically re-calculate voltage and current limits for each
setting, providing full output power in any Volt/Amp combination within the rated voltage and
current limits. Each model in the 9200 Series comes standard with USB, GPIB, and RS-232
communication interfaces for remote control.
Features:
High visibility VFD display
Easy-to-use interface with numerical keypad, cursors, and rotary control knobs
High programming and readback resolution
Low ripple and noise
Intelligent fan control
List mode programming
Standard USB, GPIB, and RS-232 interfaces
Software for remote control
SCPI-compliant command set
Output timer function
Overvoltage protection (OVP), overcurrent protection (OCP), and overtemperature
protection (OTP)
1.2 Package Contents
Please inspect the instrument mechanically and electrically upon receiving it. Unpack all items
from the shipping carton, and check for any obvious signs of physical damage that may have
occurred during transportation. Report any damage to the shipping agent immediately. Save the
original packing carton for possible future reshipment. Every power supply is shipped with the
following contents:
1 x 9201, 9202, 9205, or 9206 Power Supply
1 x User Manual
1 x AC Power Cord
1 x Certificate of Calibration
1 x Test Report
Verify that all items above are included in the shipping container. If anything is missing, please
contact B&K Precision.
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
