9
Features
• CC/CV/CR/CW/CZ operating modes
• Removable modules for easy system flexibility
• Bright VFD display for both mainframe and modules
• Power range up to 2400 W (4800 W with mainframe extension)
• Supports up to 16 channels with mainframe extension
• Operate identical modules in parallel mode for high current applications
• Synchronous load on/off function
• 16-bit voltage and current metering providing high resolution of 0.1 mV and 0.01 mA
• Transient mode up to 25 kHz
• List mode (sequence mode) – minimum 20 us step width with 84 user programmable steps
• Adjustable slew rate in CC mode
• Automatic test function
• 101 memory areas to save/recall setting parameters
• Analog current control and monitoring
• Remote sensing
• Standard LAN, GPIB, USBTMC compliant USB, and RS-232 interfaces with SCPI protocol
support
• OVP/OCP/OPP/OTP and reverse voltage protection
To Next Page