BK Precision MDL001 - Recall Test Files; Remote Operation

72
Recall Test Files
The following is a procedure on how to recall edited test files from the EEPROM.
Panel Operations VFD Display
1. Press Shift + ⑨ to enter the Program menu.
Run Program
Recall Prog
Edit Program
Exit
2. Press  key to select <Recall Prog> and press Enter. Input the saved
program number and press Enter to recall the saved testing file.
Program Select
NO: 1
3. To run the program, press  key to select <Run Program> and press
Enter.
PROG.01 Stop
Result:
4. Press Start key to start automatic testing. If you need to pause, press
Pause key and then press  key to continue.
Remote Operation
There are four types of communication interfaces available: USB, Ethernet, GPIB, and RS-232. You
can choose any one of them to communicate with a PC.
Figure 32 – Mainframe Rear Panel Communication Interfaces