14 BK Radio
When changing groups, invalid entries will not be
accepted, and the radio remains in the previously
selected group.
3. PRESS THE ENT KEY or wait 5 seconds. The radio
returns to normal operation for the new group,
and the selected channel is displayed. All selected
scanning and priority functions affect only the
channels in the group you are operating in.
• GROUP SELECTOR. Knob positions 1–15 select
groups 1–15.
1. PRESS # TWICE to select a channel.
2. PRESS A NUMBER KEY for the new channel
number.
3. PRESS THE ENT KEY or wait 5 seconds. The radio
returns to normal operation for the new channel,
and the selected group is displayed.
• CUSTOM SELECTOR. Your dealer will provide
you with the pre-programmed group/channel
combinations for your radio.
If a knob position is programmed to allow selection
of the group and/or channel with the keypad:
1. PRESS #.
2. PRESS THE NUMBER OF THE GROUP you want to
change.
3. P
RESS # TWICE.
4. PRESS THE NUMBER OF THE CHANNEL you want
to change.
If the group or channel is locked to a switch position,
pressing # will only display the knob-selected value.
New entries will not be accepted.
1 2 3
6
7 8 9
0
#
CLR
FCN
PRI
ENT
To Next Page
Loading...
Need help?
General
