GPH Owner’s Manual 21
CHANGE THE PRIORITY CHANNEL
The fixed priority channel used in Priority Modes B
and C can be permanently set or can be changeable.
If the radio has a changeable priority channel, use the
following steps to make this change.
1. SLIDE SWITCHES B (SCAN) AND C
(PRIORITY) DOWN.
2. TURN THE CHANNEL SELECTOR KNOB to the
channel you want to enter as the new
priority channel.
3. PRESS THE PRI KEY. A short beep sounds
and PR appears in the display, indicating
that the displayed channel is now the
priority channel.
NOTE: Only one channel at a time can be
designated as the priority channel.
NOTE: A channel can be the priority channel
even if it is on the scan list. Due to
multiple sampling of the same channel,
however, maximum performance
occurs when the priority channel is not
on the scan list.
PR
Label
1 2 3
4 5 6
7 8 9
0
*
#
CLR
FCN
PRI
ENT
To Next Page
Loading...
Need help?
General
