EasyManua.ls Logo

BKT Elektronik BPS2000v2 - Page 43

BKT Elektronik BPS2000v2
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Operang Instrucons - BPS2000v2 Monitoring Power Distribuon Unit
xusing the device together with other equipment not intended for use therewith or equipment
other than recommended in the technical specicaon of the device,
xfaulty transport, storage, cleaning or maintenance of the device,
xshort circuit in the electrical system outside the device,
xoperaon of the device in extremely unfavourable condions, e.g. high dusness,
xuse of chemically aggressive substances, temperature/moisture exceeding the range of proper
operaon of the device and specied in the technical specicaon, data sheet or rang plate of
the device (if any).
xany defects caused by disassembling any elements of the device, repairing them on its own and
interfering with the device's design soluons,
xdamage caused by overvoltages, including switching overvoltages, incorrect selecon of the ra-
ted voltage and exceeding the maximum load [A] of the whole device, or exceeding the maxi-
mum load [A] of each power supply socket,
xdamage caused by a faulty power supply network or faulty or inadequately selected power sup-
ply equipment,
xincorrect discharge of the temperature emied from the device, or failure to provide adequate
venlaon at the place of installaon of the devices from Appendix 1 to Warranty Terms and
Condions SDE_V1.0_2015.
14.4.3 The warranty does not cover parts subject to normal wear and tear and consumables,
14.4.4 The warranty does not cover acvies related to the replacement of fuses and manageable mo-
dules,
14.4.5 The warranty also does not cover damage resulng from the connecon of devices whose total
power exceeds the permissible range contained in the data sheet, technical specicaons, or
data contained on the device's rang plate.
1
14.5 Processing of warranty claims
14.5.1 The Buyer is obliged to report the defect of the device in wring by compleng the complaint
form on www.bkte.pl.
The completed complaint form with a copy of the invoice must be sent to the address:
reklamacja@bkte.pl
The claimed device should be delivered to:
BKT ELEKTRONIK Sp. z o.o., Ul.Lochowska 69, 86-006 Biale Blota