Black Box LES424A - Uploading the Firmware to the Hardened Serial Server

724-746-5500 | blackbox.com
Page 41
Chapter 5: Upgrading the Hardened Serial Server Firmware
5.2 Uploading the Firmware to the Hardened Serial Server
1. In the “Hardened Serial Server Selection” drop-down list, select the Hardened Serial Server to be upgraded.
2. In the ”Firmware Description” drop-down list, select the firmware to upload to the Hardened Serial Server.
3. Click the “Upgrade” button.
“Progress Bar” and “Progress Box” provide information on the progress of the transfer.
4. In the “Firmware File” drop-down list, select the firmware file to upload to the Hardened Serial Server.
5. Click “Upgrade.”
The Progress box and Progress bar display information on the upgrading process.
6. When the upgrade process is complete, click “Close.”