4646
Helm Control Systems
4.5 Engine Stop Switch
Your boat is equipped with an engine stop switch
and lanyard. When the lanyard is pulled it will
engage the switch and shut o the engines. We
strongly recommend that the lanyard be attached
to the driver whenever the engines are running.
If an engine will not start, it could be because the
lanyard is not properly inserted into the engine
stop switch. Always make sure the lanyard is
properly attached to the engine stop switch before
attempting to start the engines.
Refer to the engine owner’s manual for more in-
formation on the engine stop switch.
Mercury Engine Stop Switch & Lanyard
To Next Page
Loading...
