Blackmagicdesign cintel - Audio Input Format Settings; Flipping Image for Negative Film; Configuring Sync Output

Format
The XLR audio inputs on the side panel of Cintel Scanner can accept analog audio or AES/EBU
digital audio. Select an appropriate option from the ‘format’ menu:
 Analog: Choose this setting if you are using balanced analog audio.
 AES/EBU: Use this option to receive AES/EBU audio, also known as AES3.
Flip Image
If the image is reversed when scanning audio from negative film types, tick the
‘flipimage’ checkbox.
Enable the ‘flip image’ option to mirror the frame.
Sync Output
Use the ‘sync output’ menu to choose a sync standard if the scanner is connected via an XLR
port on the side panel to external equipment that requires synchronization.
Bi-phase and timecode output options in the ‘sync output’ menu
51Optional Audio andKeyKode Reader