Blackmagic Converters Setup Settings
The Blackmagic Converters Setup utility can be used to change settings and update your
MicroConverter’s software. You can access these settings by moving between the ‘video’,
and ‘about’ tabs.
The ‘about’ tab is detailed in the ‘changing settings’ section in this manual.
The ‘video’ tab for Micro Converter HDMI to SDI contains the following settings.
Use the ‘video’ tab in Blackmagic Converters Setup to toggle SDI levels.
Processing menu
The ‘3G Output’ menu lets you select between Level A or Level B 3G-SDI. This setting lets you
change the 3G-SDI output standard to maintain compatibility with equipment that can only
receive level A or level B 3G-SDI video. Level B is the default setting.
Micro Converter HDMI to SDI Block Diagram
HDMI In
Micro USB
HDMI Video
and audio decoder
Central Processor
and Firmware
Input automatically
detects between
SD/HD/3G-SDI
Customizable
Video Processor
Automatic
SD/HD/3G-SDI Cable
Driver and Re-clocker
SDI Out
SDI Out
Blackmagic Micro Converters 25
To Next Page
Loading...
Need help?
General
