SDI Audio Selection Table
Audio Channels Switch 4 Switch 3 Switch 2 Switch Diagram
1 and 2 OFF OFF OFF
3 and 4 OFF OFF ON
5 and 6 OFF ON OFF
7 and 8 OFF ON ON
9 and 10 ON OFF OFF
11 and 12 ON OFF ON
13 and 14 ON ON OFF
15 and 16 ON ON ON
Blackmagic Converters Setup Settings
The Converters Setup utility can be used to change settings and update your Mini
Converter’ssoftware. You can access these settings by moving between the ‘video’,
‘audio’,and‘about’ tabs.
The ‘about’ tab is detailed in the ‘changing settings’ section in this manual.
The ‘video’ tab for Mini Converter SDI to HDMI contains the following settings.
Processing menu
The ‘clip video output to legal levels’ checkbox controls clipping of your SDI input to ensure that
it stays within HDMI legal levels and should be kept on by default.
The ‘clip video to legal levels’ setting is checked by default.
This ensures that your HDMI video output stays within legal levels.
The ‘audio’ tab for Mini Converter SDI to HDMI contains the following settings.
Blackmagic Mini Converters 30
To Next Page
Loading...
