6
/
CARING FOR AND CLEANING YOUR APPLIANCE
EN
•
INSTANT PYROLYTIC
CLEANING
Check
that the time
appears
on the
display and
that the
display
is not flashing.
Simply
press the
“PYRO
ECO/ MAX” button
once
for
PYRO MAX,
or twice for
PYRO ECO
(fig.1).
fig.1
Confirm
by
pressing
the
“START” BUTTON.
You will not be able to use the oven for two
and-a-half
hours (2 hours for pyrolytic
cleaning
and
half an hour for cooling down) in the case of
“PYRO
MAX”, or two hours (1 hour 30 minutes for
cooling) in the case of “PYRO ECO” (the duration cannot be altered). This time includes the
cooling time until the door is unlocked.
The
time
when
your
oven
is
ready
for
use again
will
appear
on the display.
If the symbol appears on the display, this means the Pyro MAX cycle is in progress.
The
symbol
ECO indicates
the
Pyro ECO
cycle.
During the pyrolytic
cleaning
cycle, a lock symbol will
appear
on the display to indicate the
oven
door is locked (fig.2).
fig.2
At the
end
of the
pyrolytic cleaning cycle, 0.00
will
appear
on the
time indicator
on the
display
(fig.3).
fig.3
When
the lock symbol
disappears
from the
display,
the door can be
opened
(fig.4).
fig.4
Press
the
“STOP”
button.
The
time will
appear
on the
display
again.
When
the oven has cooled down,
remove
the white ash with a wet cloth. The oven is now clean
and
can be
used again
to cook
any
food of your choice.
Important
Before starting pyrolytic cleaning, remove all cooking dishes from the oven and remove
any major splashes adhered to the inside of the oven.Interior glass must be wiped clean prior
to running the pyrolysis cycle
Important
Do not
hang any
cloths or
tea-towels
on the
oven
door.
To Next Page
Loading...
Need help?
General
