•
CLEANING THE OUTER
SURFACES
To
clean
both the
electronic programmer window and
the
oven
door,
use
a soft cloth.
Do not
use abrasive creams
or scouring sponges.
•
CLEANING THE DOOR
•
Removing
the door
Warning
Do
not
use
abrasive
cleaning
products or hard metal scrapers for
cleaning the glass oven door, as they
could scratch the surface and cause the
glass to shatter.
Warning
Before unclipping the glass, allow the
appliance
to cool.
•
Disassembling
the door (depending
on
the
model)
fig. 1
- Open
the door
completely
and block it open
using
the red stop (fig.1).
It is supplied with your
machine
in the plastic
pack.
-
R
emove the first attached window as
follows: Use the metal part as a lever at the
points marked A on one side then the other
to unclip the
glass (fig.
2).
A
A
fig. 2
- Clean
the
glass using
a soft
sponge
(fig.3).
Do not
immerse
the
glass
in water.
Do not use
abrasive
creams or scouring
pads.
Rinse
with clean water and dry with a
lint-free
cloth.
fig.
3