•
Setting
the time
- When
the
appliance
is started up :
12:00
will
flash
on the
display
(fig.1).
fig.1
Adjust the time by pressing the
+
or
– adjustment
buttons (if you hold them down, the time will
count up quickly).
Example
: 12:30h
fig.2
Confirm
by
pressing
the
START
button (fig.2).
The display
will stop flashing.
-
To set the clock to the correct time :
Press
the
‘Time
set’ button.
This
button will
remain
lit up during adjustment.
The
time will
flash
on the
display
to
show
that the time can now be set.
Set
the time by
pressing
the
+
or
– adjustment
buttons to set the time
forward
or
backward
(fig.1).
fig.1
Confirm
by
pressing
the
START
button (fig.2).
fig.2
Important
If you do not confirm the selected time by pressing the
START
button, it will be registered
automatically after a few seconds
have
elapsed.