EN 1
/
SAFETY INSTRUCTIONS
—
Before removing
the
back, ensure
that the
appliance
is powered
down. After
cleaning,
the back should be
replaced
in accordance
with the instructions.
—
Do not use
abrasive cleaning
products or hard metal scrapers
for cleaning the oven's glass door, as they could scratch the
surface and cause
the
glass
to shatter.
—
To clean both the electronic
programmer
window and the oven
door,
use
a
window washing
product
applied
to a soft cloth.
—
Do not
use abrasive creams
or scouring sponges.
Warning:
Make sure the appliance is disconnected from the power
before replacing the lamp in order to avoid the risk of electric
shock. Change the lamp only when the appliance has cooled
down. To unscrew the view port and the light, use a rubber
glove, which will
make disassembly
easier.
Warning
:
Installation should only be performed by qualified installers
and technicians.
Warning
:
The
electrical plug
must
remain
accessible
after
installation.
It must be possible to disconnect the appliance from the power
supply, either using a plug or by fitting a switch on the fixed
wiring
system
in
accordance
with installation rules.
If the power cable is damaged, it should be replaced by the
manufacturer,
its
after-sales
service
department
or by a similarly
qualified person in order to avoid danger.
To Next Page
Loading...
Need help?
General
