BMP-320 Operating Manual
Safety instructions
Faults must be immediately rectified!
Carry out the switch on and off operations and pay attention to control
display according to the operation manual!
Before switching on the machine make sure that no-one can be
endangered when the machine starts up!
Do not switch off or remove the exhaust and ventilation devices when
the machine is running!
All persons in the proximity of the machine, when it is working,
must wear ear protectors, safety glasses with lateral protection,
noise protection as well as safety shoes. The operator is obliged to
wear close-fitting protective clothing.
Use only extension cable for extending the main cable that are
sized and marked in accordance with the overall power
consumption of the machine and the valid VDE guidelines.
2.5 Special work within the scope of use of the equipment and
maintenance activities as well as repairs during operation
Mechanical servicing work:
Put the machine in the Safety off position as described in chapter
2.6 for any servicing work on the machine.
Please follow any special safety instructions in the various chapters
on servicing the machine.
See chapter 7.1 - 7.9.
Adjustment, servicing and inspection work and time limits
specified in these Operating Instructions as well as any information
on the replacement of parts and equipment must be undertaken
and/or complied with!
These activities may only be undertaken by qualified personnel.
7
To Next Page
Loading...
