Operating Manual BMP-320
Safety instructions
2.8 Electrical engineering regulations
Work on electrical equipment or operating materials may only be
undertaken by a skilled electrician or by trained persons under the
guidance and supervision of a skilled electrician as well as in
accordance with the electrical engineering regulations.
Use only extension cable for extending the main cable that are sized
and marked in accordance with the overall power consumption of the
machine and the valid VDE guidelines.
The electrical equipment for the plant must be inspected regularly.
Defects such as loose connections or scorched cables must be
rectified immediately. Call a skilled electrician or our Customer
Services.
A second person must be at side in order to unplug or to control the
emergency stops if maintenance or repair requires working on live
parts.
The work area must be blocked off using a red and white safety
chain and a danger sign. Use a tool that is insulated against
voltages.
Only start work once you are familiar with the electrical engineering
regulations that apply to your area.
Only use voltage seekers that comply with the regulations when
troubleshooting. From time to time check voltage seekers to ensure
that they are operationally efficient.
10
To Next Page
Loading...
