BMP-320 Operating Manual
Operation
6.3 Recommended direction of operation
; Position the filter unit near to a power supply connection.
; Place the scarifier near to the filter unit and spread out the hose
as shown in fig. 6.1.
; Work with the scarifier, with the hose spread out in the opposite
direction, repeating the process away from the filter unit..
Fig. 6.1
1 Filter unit
2 Dust hose
3 Scarifier
; Travel stepwise over the work area considering the service
length of the dust hose.
; Finish the scarifying process by scarifying the area where the
filter unit originally stood.
; In case of heavy uneven floors its is suitable to repeat several
times the scarifying process.
3
To Next Page
Loading...
