Operating Manual BMP-320
Maintenace
7.1 Recommendations
Prior to any repair works on the machine and its drives,
secure the machine against unintentional switching-on. Put
the machine to its safety off position. Chapter 2.6
Failures due to inadequate or incorrect maintenance may generate
very high repair costs and long standstill periods of the machine.
Regular maintenance therefore is imperative.
Operational safety and service life of the machine depend, among
other things, on proper maintenance.
The following table shows recommendations about time, inspection
and maintenance for the normal use of the machine.
The time indications are based on uninterrupted operation. When the
indicated number of working hours is not achieved during the
corresponding period, the period can be extended. However a full
overhaul must be carried out at least once a year.
Due to different working conditions it can’t be foreseen how frequently
inspections for wear check’s, inspection, maintenance and repair
works ought to be carried out. Prepare a suitable inspection schedule
considering your own working conditions and experience.
Our specialists will be happy to assist you with more advice.
Follow additional operating and maintenance of OEM if
included during your service and maintenance work.
Pay attention to special notice, given by instructions for
electric-motors or combustion engines.
2
To Next Page
Loading...
