Operating Manual BMP-320
Transport
4.1 Transport of the machine with vehicles
When transporting the machine proceed in such a manner that
damage due to the effects of the use of force or incorrect loading and
unloading is avoided. Secure the machine with a tightening belt. Use
at least two belts and tighten the machine..
4.2 Manuel mode of moving the machine
In order to move the machine the quick lifting device has to be
manipulated as described in chapter 3.5.
Now the machine can be moved by hand very easy.
The machine is to be transported after being separated into:
• Scarifier
• Filter unit 317 DCP if off-the-shelf
• General accessories
4.3 Transport with cranes and lifts
If you have to transport the machine with hoists like crane or lifts, pay
attention to the max. load that these devices may carry. Use only
allowed and homologated sling tools. Notice the machine weight
from chapter 1.2 "Unit specifications" or rather from the shield-type
you’ll find bolted to the machine.
4.4 Operation of the machine while scarifying
The machine will be operated while scarifying in accordance with the
instructions given in Chapter 5 ”Initial operation“.
2
To Next Page
Loading...
