BMP-320 Operating Manual
Maintenance
drum as well as the appropriate selection of tools for the surface to be
treated.
If the scarifying drum is not uniform assembled the machine will
become unbalanced and excessive wear, will arise.
Blastrac will not feel responsible for any faulty parts, that are
damaged caused by inappropriate assembly.
Following important key factors affect the scarifying pattern:
• The selected speed must be suitable for the conditions of the
surface.
• You need to choose appropriate tools for different application.
7.5 Drum Assembly Layout
We have tested the assembly layout examples enclosed in this
manual they will result in the best possible pattern being achievable.
The selection of the flail type as well as the arrangement on the drum
assembly is most important to obtain an optimum work with the
scarifier BMP-320.
Incorrect arrangement of the assembly will cause high wear and costs
as well as insufficient machine performance.
See assembly layouts at chapter. 10.
5
To Next Page
Loading...
