EasyManua.ls Logo

Blastrac BMP-320 - 6.4 Switching Off the Machine; 6.5 Trouble Shooting

Blastrac BMP-320
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating Manual BMP-320
Operation
6.4 Switching- off the machine
; Lift the scarifying drum from the surface by the quick lift.
; Push the Emergency shutdown switch
(In case of working with the BMP-320 with internal combustion
engine, take into account the enclosed information of the
manufacturer).
; Switch of the connected filter unit.
; When the Blastrac scarifier is put out of operation for a longer
period of time, pull out the mains plug and cover the machine
with a plastic foil.
Make sure that all turning machine parts come to standstill before
any inspection or maintenance works are started. Note the
prescribed safety off position . (Chapter 2.6)
6.5 Trouble Shooting
Irrespective of the following information, the local safety regulations
are valid in any case for the operation of the machine.
First put the machine to its Safety off position. Afterwards start
searching for the fault.
4

Table of Contents

Related product manuals