Operating Manual BMP-320
General
Description Part no. Range of application
Standard drum
BMP-E/B 320
MPD320-4-1
Standard scarifying drum with 4
tempered 22mm axle.
Scarifying drum MPD320-8 Special with 8 tempered 20mm axle.
(Only for MPL25)
Drum special strong MPD320-5
Scarifying drum reinforced with 5
axle. To be use with MPL23 and
MPL28. Imperative use for concrete
scarifying works.
Drum axle MPA320-20 Tempered axle for MPD320–8
Drum axle MPA320-22 Tempered axle for MPD320-4/5
Octagon flaile HQ
(with HM-Points)
MPL23 For particularly hart applications,
very wear resistant:
•To roughen, cut and scarify concrete
surfaces.
• To corrugate concrete and asphalt.
• To clean stone and concrete
surfaces.
• To remove road markings.
• To remove and level uneven floors.
Scarifying drum
assembled with
octagon flaile HQ
MPD320-4L23S 64 x MPL23
184 x MPL30
Reinforced scarifying
drum assembled with
octagon flailes HQ
MPD320-5L23S 65 x MPL23
260 x MPL30
Octagon flaile
(with HM-Points)
MPL24 Wear resistant. For hart applications:
• To roughen, cut and scarify
concrete surfaces.
• To corrugate concrete and asphalt.
• To clean stone and concrete
surfaces.
• To remove road markings.
• To remove and level uneven floors.
Scarifying drum
assembled with
octagon flailes.
MPD320-4L24S 64 x MPL24
184 x MPL30
8
To Next Page
Loading...
