60
To change the set frequency in small incre-
ments,
briefl y press the
or button 4.
To change the set frequency quickly,
press and hold down the
or button
4 for a longer period of time.
Browsing through broadcasting
networks (FM only)
If a radio station provides several pro-
grammes, you have the option of browsing
through its so-called "broadcasting net-
work".
Note:
The convenient RDS function and PTY
must be activated before you can use
this feature.
Press the
or button 4 to switch
to the next station on the broadcasting
network.
Note:
When using this feature, you will only
be able to switch to stations that you
have received once before already. To
receive the stations, use the Scan or
Travelstore function.
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into
those with a weak reception.
Press the MENU•OK button 5.
Press the
or button 4 repeat-
edly until "TUNER MENU" appears on
the display.
쏅
쏅
쏅
쏅
쏅
Press the
button 4 to open the
menu.
Press the or button 4 repeatedly
until "SENSITIVITY" appears on the dis-
play.
Press the
button 4 to open the
menu.
The display shows the currently set sensi-
tivity level. "SENS HI6" indicates the high-
est sensitivity, "SENS LO1" the lowest.
Set the desired sensitivity with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
Notes:
This setting is only possible in radio
mode.
The device stores the sensitivity value
set in the respective FM and AM wave-
band.
Storing stations
Storing stations manually
Select the desired memory bank (FM1,
FM2, FMT) or one of the wavebands
(MW or LW).
Tune into the desired station.
Press and hold down one of the station
buttons 1 - 6 9 for longer than 2 sec-
onds to assign the station to that but-
ton.
쏅
쏅
쏅
쏅
쏅
•
•
쏅
쏅
쏅
Radio mode
02_NewOrleansMP58_gb.indd 6002_NewOrleansMP58_gb.indd 60 07.12.2007 14:57:23 Uhr07.12.2007 14:57:23 Uhr
To Next Page
Loading...
