Blaupunkt New Orleans MP58 - Sound Equalizer Settings; Equalizer Middle (E-MIDDLE); Equalizer Treble (E-TREBLE)

78
Adjusting equalizer middle
(E-MIDDLE)
You can select one of 4 middle frequencies
(500 Hz, 1,000 Hz, 1,500 Hz, 2,500 Hz)
and set the level for the selected frequency
between -7 and +7. You can also set the
quality factor between 0.5 and 1.25.
Adjusting middle frequency, level and
quality factor
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
Press the
button 4.
"E-BASS" appears on the display.
Press the
or button 4 repeat-
edly until "E-MIDDLE" appears on the
display.
Press the
button 4 to open the
E-Middle menu.
"GAIN" appears on the display.
Press the
or button 4 to switch
between "GAIN" (level), "FREQ" (mid-
dle frequency) and "QUALITY" (quality
factor).
Press the
button 4 to open the
menu.
Set the level, middle frequency and
quality factor each with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer treble
(E-TREBLE)
You can select 1 of 4 treble frequencies
(10 kHz, 12.5 kHz, 15 kHz, 17.5 kHz).
Note:
For further information on setting the
treble level, please read the section en-
titled "Adjusting the treble (TREBLE)"
in this chapter.
Adjusting the treble frequency
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
press the
button 4.
"E-BASS" appears on the display.
Press the
or button 4 repeat-
edly until "E-TREBLE" appears on the
display.
Press the
button 4 to open the
E-Treble menu.
"FREQ" appears on the display.
Press the
button 4 to open the
menu.
Set the treble frequency with the
or
button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
02_NewOrleansMP58_gb.indd 7802_NewOrleansMP58_gb.indd 78 07.12.2007 14:57:26 Uhr07.12.2007 14:57:26 Uhr