Blaupunkt New Orleans MP58 - Clock and Sound Settings; Continuous Time Display; Sound Adjustment Overview; Equalizer Features

75
ENGLISH
Press the button 4 to open the
menu.
Press the
or button 4 repeated-
ly until "24HR MODE" or "12HR MODE"
appears on the display.
Press the
or button 4 to switch
between the modes.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
Displaying the time continuously
when the device is off and the
ignition is on
To display the time when the device is off
and the vehicle ignition is on,
press the MENU•OK button 5.
Press the
or button 4 repeat-
edly until "CLOCK MENU" appears on
the display.
Press the
button 4 to open the
menu.
"CLOCK" and the current setting appear on
the display.
Press the
or button 4 to switch
the display between CLOCK ON and
CLOCK OFF.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, USB and
AUX). The volume distribution (balance and
fader) and X-BASS settings apply to all the
audio sources.
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and middle
and to adjust the level for the selected fre-
quency between -7 and +7. In addition, you
can adjust the quality factor for bass and
middle.
Note
The quality factor determines the fi lter
quality of the equalizer, i.e. the edge
steepness and fi lter bandwidth, de-
pendent upon the characteristic fre-
quency.
A low quality factor means a low edge
steepness and a high fi lter bandwidth;
a high quality factor means a high edge
steepness and a low fi lter bandwidth.
The following table shows an overview of
the setting options:
BASS TREBLE MIDDLE
GAIN x x x
Frequency
(FREQ)
xxx
Quality
factor
(QUALITY)
x–x
Clock – Time Sound
02_NewOrleansMP58_gb.indd 7502_NewOrleansMP58_gb.indd 75 07.12.2007 14:57:25 Uhr07.12.2007 14:57:25 Uhr