66
The next track will then be scanned. "SCAN"
and the current track number are shown on
the display.
Note:
You can set the scan time. For further
information, please read the section
entitled "Setting the scanning time" in
the "Radio mode" chapter.
Cancelling Scan and continuing listening
to a track
To exit the scan process,
press the MENU•OK button 5.
The currently scanned track continues play-
ing.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the 4 RPT button 9.
"RPT TRK" appears briefl y on the display,
and the REPEAT symbol is shown. The track
is repeated continuously until you deacti-
vate Repeat.
Cancelling Repeat
If you want to cancel the repeat function,
press the 4 RPT button 9 again.
"RPT OFF" appears briefl y on the display
and the REPEAT symbol disappears. Normal
playback is then resumed.
Interrupting playback (PAUSE)
Press the 3 button 9.
"PAUSE" appears on the display.
쏅
쏅
쏅
쏅
Cancelling pause
During the pause, press the button 3
9.
Playback is continued.
Displaying the time
To show or hide the time,
press the DIS button :.
Traffi c announcements
in CD mode
If you wish to receive traffi c announcements
in CD mode,
press the TRAF button 3.
The priority for traffi c announcements is
activated if the display shows the traffi c
jam symbol. For further details, please read
the chapter entitled "Traffi c information".
Ejecting a CD
Press the button 1.
The control panel opens to the bottom.
Press the button > next to the CD
compartment.
The CD is ejected.
Remove the CD and close the control
panel.
Notes:
If a CD is ejected, the drive will auto-
matically draw it back in again after
approx. 10 seconds.
You can also eject CDs whilst the de-
vice is switched off or whilst another
audio source is activated.
쏅
쏅
쏅
쏅
쏅
쏅
•
•
CD mode
02_NewOrleansMP58_gb.indd 6602_NewOrleansMP58_gb.indd 66 07.12.2007 14:57:24 Uhr07.12.2007 14:57:24 Uhr
To Next Page
Loading...
