77
ENGLISH
Setting the left/right volume
distribution (BALANCE)
To adjust the left/right volume distribution,
press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "BALANCE" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 to adjust
the balance (right/left).
To exit the menu,
press the ESCAPE button ;.
Adjusting the front/rear volume
distribution (FADER)
To adjust the front/rear volume distribu-
tion,
press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeatedly
until "FADER" appears on the display.
Press the
button 4 to open the
menu.
Press the
or button 4 to adjust
the fader (front/rear).
To exit the menu,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting equalizer bass
(E-BASS)
You can select 1 of 4 bass frequencies
(60 Hz, 80 Hz, 100 Hz, 200 Hz) and set the
quality factor between 1.0 and 2.0.
Note:
For further information on setting the
bass level, please read the section enti-
tled "Adjusting the bass (BASS)" in this
chapter.
Adjusting bass frequency and quality
factor
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
press the
button 4.
"E-BASS" appears on the display.
Press the
button 4 to open the
E-Bass menu.
"FREQ" appears on the display.
Press the
or button 4 to change
between the setting options "FREQ"
(bass frequency) and "QUALITY" (qual-
ity factor).
Press the
button 4 to open the
menu.
Set the bass frequency and quality fac-
tor each with the
or button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Sound
02_NewOrleansMP58_gb.indd 7702_NewOrleansMP58_gb.indd 77 07.12.2007 14:57:26 Uhr07.12.2007 14:57:26 Uhr
To Next Page
Loading...
