Blaupunkt New Orleans MP58 - Preamplifier and Subwoofer Output; Sub-Out Level and Cut-off Frequency

79
ENGLISH
Preamplifi er output
Preamplifi er output
(Preamp-Out/Sub-Out)
You can use the preamplifi er outputs
(Preamp-Out) of the car sound system to
connect external amplifi ers. In addition,
you can connect an amplifi er for operating
a subwoofer to the integrated dynamic low-
pass fi lter of the device (level and cut-off
frequency can be adjusted).
For this purpose, the amplifi ers must be
connected as described in the installation
instructions.
Adjusting Sub-Out level and Sub-
Out cut-off frequency
The sub-out level can be adjusted in 8 incre-
ments (0 to +7). You can also select 1 of 3
cut-off frequencies: 80 Hz, 120 Hz, Hz and
160 Hz.
Press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
press the
button 4.
"E-BASS" appears on the display.
Press the
or button 4 repeat-
edly until "SUBOUT" appears on the
display.
Press the
button 4 to open the Sub-
Out menu.
"GAIN" appears on the display.
쏅
쏅
쏅
쏅
쏅
Press the
or button 4 to switch
between the setting options "GAIN"
(level) and "FREQ" (cut-off frequency).
Press the
button 4 to open the
menu.
Set the level and cut-off frequency with
the
or button 4.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
02_NewOrleansMP58_gb.indd 7902_NewOrleansMP58_gb.indd 79 07.12.2007 14:57:26 Uhr07.12.2007 14:57:26 Uhr