81
ENGLISH
Equalizer presettings
(PRESETS)
This device features an equaliser in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
To select an equaliser setting,
press the AUD button =.
"BASS" appears on the display.
Press the
or button 4 repeat-
edly until "ENHANCED MENU" appears
on the display.
press the
button 4.
"E-BASS" appears on the display.
Press the
or button 4 repeat-
edly until "PRESETS" appears on the
display.
Press the
button 4 to open the
presets menu.
Press the
or button 4 to select
one of the presettings "ROCK", "POP",
"CLASSIC" or select "P-EQ OFF" to de-
activate the presetting.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Adjusting the display
settings
Adjusting the display brightness
If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching the ve-
hicle lighting on or off. You can adjust the
display brightness separately for night and
day in steps ranging from 1 - 16.
Press the MENU•OK button 5.
Press the
or button 4 repeatedly
until "DISPLAY MENU" appears on the
display.
Press the
button 4 to open the
menu.
Press the
or button 4 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the
button 4 to open the
menu.
Press the
or button 4 to switch
between the brightness levels.
When you have fi nished making your chang-
es,
press the ESCAPE button ;.
Setting the display illumination
colour
For the display illumination, you can se-
lect a colour from the RGB spectrum (red-
green-blue) or mix using the colours red
and green, select a colour during the col-
our scan or switch on a constant colour
change.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
Equalizer presettings Adjusting the display settings
02_NewOrleansMP58_gb.indd 8102_NewOrleansMP58_gb.indd 81 07.12.2007 14:57:26 Uhr07.12.2007 14:57:26 Uhr
To Next Page
Loading...
