46
INTRODUCTION NAVIGATION RADIO CD / MP3 CD CHANGER SETUP APPENDIX
Bypassing a traffic jam during navigation
Alongside the ability to automatically bypass traffic jams with the aid of the dy-
namic navigation feature, the TravelPilot E1/E2 also gives you the option of
manually entering traffic jams or blocked sections of road during an active nav-
igation session.
To bypass a traffic jam, proceed as follows:
1 Press and hold down the NAV button 1 for longer than 2 seconds.
✔ A selection menu appears in the display.
2 Mark and confirm the TRAFFic JAM menu item.
✔ The traffic jam menu appears in the display.
3 Turn the menu knob : to set the distance to the end of the traffic jam rela-
tive to your current position.
4 Press the OK button ;.
5 Press the ESC button =.
✔ The navigation session display appears again and the route is recalculated.
Note: If necessary, the system will ask you to insert the navigation
CD-ROM.
Cancelling the traffic jam bypass feature
1 Press and hold down the NAV button 1 for longer than 2 seconds.
✔ A selection menu appears in the display.
2 Mark and confirm the TRAFFic JAM menu item.
✔ A query appears in the display.
3 If you want to cancel the traffic jam bypass feature, press the OK button ;.
4 Press the ESC button =.
✔ The navigation session display appears again and the route is recalculated.
TRAFF. JAM
ROUTE OPTI
NAVI
NAV
T
MC
=RAFF> JAM
NAV
T
MC
DISTANCE
3,27 mi
=RAFF> JAM
NAV
T
MC
CANCEL
TRAFFIC
JAM?
To Next Page
Loading...
